Aero 4Z Plunge10 (F8920)
4 Flute Square End

Features

  • Center Coolant Supply
  • Chamfer 45°
  • End Gash allows for 10° Ramp Plunging
  • Internal Teeth
  • Length of Cut 2xD
  • Non center cutting
  • Optimized Flute Cross Section
  • Optional Weldon Flat
  • Sizes D<6mm on dia.6mm Stepped Shank
  • Unequal Indexing

Application

  • Machining of non-ferrous metals, above all Aluminum and Copper
  • Roughing and Semi finishing

Annotation

  • Alternate helix dampens vibrations
  • The purpose of flute polishing is to minimize the heat build-up and consequential material sticking.
Order number D1 D2 D3 L1 L2 L3 Z Dm EDP
F8920.4/3,9.V6.57.8/12.Z4 4 6 3,9 57 8 12 4 5,4 UC-11713 Inquire
F8920.5/4,9.V6.57.10/15.Z4 5 6 4,9 57 10 15 4 6,8 UC-11714 Inquire
F8920.6.V6.57.12.Z4 6 6 57 12 4 8,1 UC-11715 Inquire
F8920.8.V8.63.16.Z4 8 8 63 16 4 10,8 UC-11716 Inquire
F8920.10.V10.72.20.Z4 10 10 72 20 4 13,5 UC-11717 Inquire
F8920.12.V12.81.24.Z4 12 12 81 24 4 16,2 UC-11718 Inquire
F8920.14.V14.81.28.Z4 14 14 81 28 4 18,9 UC-11719 Inquire
F8920.16.V16.92.32.Z4 16 16 92 32 4 21,6 UC-11720 Inquire
F8920.18.V18.92.36.Z4 18 18 92 36 4 24,3 UC-11721 Inquire
F8920.20.V20.104.40.Z4 20 20 104 40 4 UC-11722 Inquire
F8920.4/3,9.W6.57.8/12.Z4 4 6 3,9 57 8 12 4 5,4 UC-11713W Inquire
F8920.5/4,9.W6.57.10/15.Z4 5 6 4,9 57 10 15 4 6,8 UC-11714W Inquire
F8920.6.W6.57.12.Z4 6 6 57 12 4 8,1 UC-11715W Inquire
F8920.8.W8.63.16.Z4 8 8 63 16 4 10,8 UC-11716W Inquire
F8920.10.W10.72.20.Z4 10 10 72 20 4 13,5 UC-11717W Inquire
F8920.12.W12.81.24.Z4 12 12 81 24 4 16,2 UC-11718W Inquire
F8920.14.W14.81.28.Z4 14 14 81 28 4 18,9 UC-11719W Inquire
F8920.16.W16.92.32.Z4 16 16 92 32 4 21,6 UC-11720W Inquire
F8920.18.W18.92.36.Z4 18 18 92 36 4 24,3 UC-11721W Inquire
F8920.20.W20.104.40.Z4 20 20 104 40 4 UC-11722W Inquire