SuperSlim 8D (F8480)
3 Flute Scraper

Features

• Chamfer 45°
• Eccentric Relief

Application

• Amount of stock from 0.03 to 0.2mm according the tool L/D ratio and workpiece material
• No cutting conditions are defined. A chatter-free run is the most important factor. Cutting speed from 25 to 60m/min for all materials. A feed of 0.1-0.2 mm/rev according to the surface finish required.
• Recommended for CNC and conventional machine tools
• Side milling with peripheral edges only

Annotation

• Equidistant shape with only little stock remaining is required before SuperSlim application; otherwise all odds are followed, instead of milling them away.
• Repeating the operation without load worsens the flat straightness due to tool deflection
• Requires tool holder with very low runout